Care And Cleaning; Troubleshooting - KitchenAid KHBC212 Instructions

CARE AND CLEANING

Always clean the appliance and its
attachments after use and before storing.
1. Unplug Commercial Immersion Blender
before cleaning.
2. Remove the attachments by twisting (see
"Operating Your Commercial Immersion
Blender" section)
3. Wipe the motor body and attachments
with a damp cloth. Mild dish soap may be
used, but do not use abrasive cleansers.
NOTE: Do not immerse the motor
body in washing solution, rinse water or
sanitizing solution.

TROUBLESHOOTING

If the Commercial Immersion Blender has stopped working, check for the
following:
Unit has been unplugged
• Release the power button
• Check the power supply
Machine has overheated
• Release the power button
• Unplug the unit
• Wait a few minutes for the motor to cool
down and the thermal safety mechanism
to reset
Unknown
• Release the power button
• Unplug the unit
• Check the following:
- electrical plug for damage
10
4. Wipe power cord with warm, sudsy
cloth; then wipe clean with damp cloth.
Dry with soft cloth.
Commercial Immersion Blender
Attachments
Wash blending attachments in hot, soapy
water, or in the dishwasher. Dry thoroughly.
• Restart the Commercial Immersion
Blender as instructed in "Operating Your
Commercial Immersion Blender"
• Restart the Commercial Immersion
Blender as instructed in "Operating Your
Commercial Immersion Blender"
- blades for freedom of movement
(food may be lodged between blades
and plastic guard
- power cord for cuts or other damage
- drive shaft for freedom of rotation
(check by removing the attachment arm
and rotating the shaft manually)