Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
58.
When it comes to putting the rotation tools in gear, please check that no-one is in front or in the
vicinity of the machine. Firmly hold the handlebar of the machine; it has a tendency to lift during this
procedure.
59.
During the work, keep at a safe distance from the rotation instruments by adjusting the length of the
handlebar.
60.
You must remove all stones, wires, glass, big objects, metal objects, etc from the soil on which you
are to work.
61.
Never modify the engine fitting, nor start the engine on an over-regime.
62.
The rotation tools are sharp and turn at high speed. They may cause extremely serious accidents.
a.
Do not put your hands or feet close to the rotation tools while the engine is running.
b.
Turn the engine off before undergoing control or maintenance of the rotation tools.
c.
Turn the ignition lid off, avoiding the accidental start of the engine. Wear thick gloves to protect your
hands during cleaning, control or replacing of the tools.
d.
In case of an emergency, know how to turn the engine off quickly and consequently the rotation
tools.
63.
Only work with day light or good quality artificial light.
64.
Never use the machine with damaged or used parts. Replacement parts of a differing quality can
damage the machine and interfere with its safety. Replace only with original parts.
65.
In order to avoid the risk of fire, leave the engine to cool before starting the machine again.
66.
Clean the machine of vegetable debris, especially the engine when it is cold, before storing it. In
order to reduce the risk of fire, keep the exhaust silencer clean.
67.
If necessary, empty the fuel tank when the engine is cold and outdoors.
68.
Store the machine in a dry location. Never store the machine with fuel in the tank in a location
where the fuel vapours can catch fire.
69.
Turn the engine off during the machine transport. In order to transport it in your car, you must leave
it to cool and empty the fuel tank. You must always check the machine's balance. You must use gloves when
handling the machine.
70.
Keep all nuts and screws tightened, in order to guarantee safe use. It is essential to regularly
maintain the machine for your safety and good performance of the machine. Only use the recommended
tools or accessories.
71.
The machine can be equipped with some accessories. The owner is responsible for checking whether
the tools or accessories comply with European safety regulations in force. Use of non-certified accessories
may interfere with your safety.
72.
Do not use the machine as a means of traction for non-adapted accessories (e.g., trailer or towing).
34
BL355 BL360
Publicité
Chapitres
Table des Matières
