Benassi BL355 Manuel D'utilisation page 30

13 Cleaning and Periodic Maintenance
Conduct regularly the operation of revision and maintenance of the machine, be especially careful to
maintain a correct oil level in the engine; it guarantees to have a machine all ready to be used in all security.
All cleaning and maintenance operation must make itself engine extinguishes, and disconnect spark plug
thread to avoid all inopportune starting.
Be especially prudent at the time of the cleaning of the rotors, because these are cutting tools that can
provoke serious injuries.
13.1 Replacement of the rotors
If the rotors are used or damaged, it right to replace them. To keep a good balancing of the assembler, it's
necessary to replace all rotors at the same time by new ones.
When make the changing of the rotors, be sure that the tiller is balanced, because his fall
could origin damages in any component or can provoke serious injuries.
13.2 Replacement of the belt
If the rotors don't work correctly after have adjusted the clutch cable, you should replace the transmission
belt. Remove the plastic cover and the old belt. Replace by a new one. Adjust correctly the clutch cable
before put the plastic cover.
30
Rotors Changing
1. Put the machine in a place well safety and plane.
2. Remove the clips from axes of rotors.
3. Insert for underneath of the axe, a safety support to hold the machine and
stay balanced.
BL355 BL360