Niko 16-678 Mode D'emploi page 96

16-678
Via the Windows dialog box, you can save the file under the desired name. The configuration is then sent to the exchange.
EN
The program first tests the communication with the exchange. If communication is succesful, the message 'PABX found' is displayed together with the
software version. If a new software version is available or required, EasySetup informs you of this (see 5.9).
Subsequently, the configuration is loaded. During loading, a yellow smiley with a green question mark is displayed. If loading is carried out successfully,
'Sending SUCCESSFUL'. The green question mark disappears and only the yellow smiley is displayed.
If the serial cable or power supply is not connected or if there is some other problem with the serial communication, the following error report is sent:
PABX does NOT respond!'. Correct the mistake and then again click 'Send'.
96