Publicité
Les langues disponibles
Les langues disponibles
2610055543.qxp_GKT18V-20GC 5/26/20 4:37 PM Page 18
MITER GUIDE
The miter guide
used to precisely position a track from 60°
left to 45° right.
The miter guide must be positioned at the
front end of track.
A.
Loosen the knob
the miter guide (Fig. 11).
Follow instructions in "Connecting
B.
Multiple Tracks" to a
guide to the desired track using
41
connector
C.
Use the fence
angle. As the fence is moved, the
46
indicator
D.
Once the desired angle is set, tighten
48
the knob
guide to hold it at that angle (Fig. 13).
E.
Position the fence and connected track
such that the fence rests against the
workpiece.
F.
Once the miter guide and connected
track have been positioned as desired,
secure the miter guide and connected
track in place (refer to "Securing
Tracks").
Track Assembly
43
(sold separately) can be
48
on the bottom of
ttach the miter
.
47
to set the desired
shows the angle (Fig. 12).
on the bottom of the miter
Fig. 11
Fig. 12
47
Fig. 13
18
47
43
48
46
43
48
Publicité
