Unpacking; Assembling - Optika Italy B-1000 Serie Manuel D'utilisation

6.

Unpacking

The microscope is housed in a moulded Styrofoam container. Remove the tape from the edge of the container
and lift the top half of the container. Take some care to avoid that the optical items (objectives and eyepieces) fall
out and get damaged. Using both hands (one around the arm and one around the base), lift the microscope from
the container and put it on a stable desk.
Do not touch with bare hands optical surfaces such as lenses, filters or glasses. Traces of grease or
other residuals may deteriorate the final image quality and corrode the optics surface in a short time.
7.

Assembling

Once opened the box, the microscope parts are the following:
7.1 Manual version
⑪
⑫
⑤
① Frame
② Fluorescence epi-illuminator
③ Objectives
④ Condenser
⑤ Observation head
⑥ Eyepieces
⑦ Stage
⑧ HBO lamp housing
⑨ Darkening plate
①
⑧
⑩
④
⑥
⑨
③
⑩ Microscope power supply
⑪ Fluorescence power supply
⑫ Power cord for fluorescence power supply
⑬ Immersion oil (if 100x is included in the con-
figuration)
⑭ Allen wrench
⑮ Dust cover
Page 8
⑭
⑮
②
⑦
⑬