7.3
Assembling the microscope
1. Insert the fluorescence epi-illuminator over the
microscope and tighten the screw with the 2 mm
Allen wrench. (Fig. 1)
2. Screw the extension tube on the rear of the at-
tachment, using the 3 provided allen screws. (Fig.
2)
3. Screw the lamp housing on the extension tube,
tightening the screws inside the holes. (Fig. 3)
4. Insert the optical head above the attachment,
using the 2 mm Allen wrench to tighten the screw.
(Fig. 4)
Page 10
Fig. 1
Fig. 2
Fig. 3
Fig. 4