Assembly; Contents; Assemble The Transport Caddy - Polaris Alpha iQ Manuel Du Propriétaire

3
Page 6

Assembly

Contents

The packaging should contain the following items:
• Polaris cleaner and floating cable
• Control unit
• Transport and storage caddy assembly
components (Figure 1)
a. handle frame
b. support blocks (x 2)
c. wheels (x 2)
d. wheel locking clips (x 2)
e. wheel axle / hubcap (x 2)
f. base unit
g. cleaner hook
h. caddy handle
Figure 1. Transport Caddy Assembly Components
x 2
B
A
F
When unpacking the cleaner and its components:
• Make sure each component is in the box.
• Check cleaner and components for damage
during transport.
• If there are any missing parts or damage,
contact Technical Support at 1-800-822-7933.
D
C
x 2
x 2
x 2
E
H
G

Assemble the Transport Caddy

1. Unscrew the handnut from the base
(Figure 2).
Figure 2. Remove Handnut from Base Unit
2. Insert the metal handle frame tubing into the
base with notch end at the top, then rotate so
the bends are away from you. (Figure 3).
3. Push base down (Figure 3) so the metal
handle frame is seated in the recess on the
underside of the base.
Figure 3. Connect Metal Frame to Base Unit