sigfox ANALOG PWR - Guide utilisateur / User guide version V1.2.0
2.2. Application operation
2.2.1 Periodic transmission
The product allows the measurement and the periodic transmission of the values of the sensors according to the following diagram:
EN
The settings associated with this mode of operation are:
•
the transmission period (register 301).
•
the presence and type of external sensor (registers 302 and 304).
A complete list of the registers can be found in paragraph 3.4.
Eg:
Registre
S301
S302
S304
Product in standby
Period
reached?
Measurement input A
(if enabled)
Measurement input B
(if enabled)
Send frame 0x42
Value encoding
Decimal
Hexadecimal
Hexadecimal
No
YES
Valeur
Result
6
Periodic mode with a period of 6x10min =
60 minutes
0x02
Channel A configured for a sensor 4-20mA
0x01
Channel B configured for a sensor 0-10V
Page
52
of 73