shark AI ROBOT VACMOP Guide D'instructions page 17

GETTING TO KNOW YOUR SHARK® AI ROBOT VACMOP
Pad Slot
DOCK FRONT
Charging Contacts
DOCK LANDING MAT
s h a r kc l e a n . e u
FLUID RESERVOIR
Removal Buttons
DOCK BOTTOM
Charging Dock
Charger Cord Wrap
(This side up)
Fill Port
1m
1.6m
• Select a permanent location with strong Wi-Fi for the Charging Dock, because every time you relocate it,
your robot will have to completely re-map your house.
• Place the dock with its back against a wall and attach the landing mat. Select a level surface on bare floor,
in a central area. Do not place dock against baseboards or heating elements.
• Remove any objects that are closer than 1m from either side of the dock, or closer than 1.6m from the front
of the dock.
• Plug in the dock. The indicator light will illuminate green when the dock has power.
DOCK SETUP
1m
INSTALLING THE SIDE BRUSHES
Snap the 2 included Side Brushes onto the square
pegs on the bottom of the robot.
s h a r kc l e a n . e u