Dismounting, Return And Disposal - WIKA CPH62I0 Mode D'emploi

9. Dismounting, return and disposal

9. Dismounting, return and disposal
GB
9.1 Dismounting
Only disconnect test and calibration installations once the system has been depressu-
rised!
9.2 Return
When returning the hand-held pressure indicators, use the original packaging or a
suitable transport package.
To avoid damage:
1. Wrap the hand-held pressure indicator in an antistatic plastic film.
2. Place the hand-held pressure indicator, along with the shock-absorbent material, in
the packaging. Place shock-absorbent material evenly on all sides of the transport
packaging.
3. If possible, place a bag, containing a desiccant, inside the packaging.
4. Label the shipment as transport of a highly sensitive measuring instrument.
Enclose the completed return form with the hand-held pressure indicator.
34
WARNING!
Residual media in dismounted hand-held pressure indicator can result
in a risk to persons, the environment and equipment. Take sufficient
precautionary measures.
WARNING!
Strictly observe when shipping the hand-held pressure indicators:
All hand-held pressure indicators delivered to WIKA must be free from
any kind of hazardous substances (acids, bases, solutions, etc.).
The return form is available on the internet:
www.wika.de / Service / Return
WIKA operating instructions, model CPH62I0