The Serial Interface - WIKA CPH62I0 Mode D'emploi

6. Commissioning, operation
Clearing data:
When the ´STORE/QUIT´ key is pressed for 2 seconds, the logger operation will be
selected.
GB
The display will show:
By briefly pressing the ´MAX´ key or ´MIN´ key, the display will change to:
When ´STORE/QUIT´ is pressed, the choice for clearing the logger memory will be
displayed:
The selection can be made with the ´MAX´ key and ´MIN´ key. The ´STORE/QUIT´ key
confirms the selection.

6.5 The serial interface

For data transfer to a computer there are two electrically-isolated interface adapters
available (see price list calibration technology) for connection to a RS-232 or USB inter-
face (USB-driver necessary).
(See calibration technology price list: Data logger evaluation software GSoft.)
30
clear all recordings
clear the last recording
sequence
WARNING!
The serial interface is not allowed to be operated in hazardous areas.
clear nothing
(cancel menu)
WIKA operating instructions, model CPH62I0