Emerson 4th AVENUE CF766LBQ00 Mode D'emploi page 7

3. Ceiling Fan Assembly
3.7
Separate, untwist and unkink the three 80" motor leads.
Route the 80" black, blue and white motor leads
through the downrod (Figure 7).
3.8
Align the Clevis Pin holes in the Downrod with the holes
in the Motor Coupler.
Install the Clevis Pin and secure with the Hairpin Clip
(Figure 8).
The Clevis Pin must go through the holes in the Motor
Coupler. It is critical that the Clevis Pin and Hairpin Clip
are properly installed in the Motor Coupler.
Pull on the Downrod to make sure the Clevis Pin is
properly installed.
WARNING
!
It is critical that the clevis pin in the motor coupler is
properly installed and securely tightened. Failure to
verify that the pin is properly installed could result in
the fan falling.
(Continued)
THREE 80" MOTOR LEADS
Figure 7
MOTOR
COUPLER
SETSCREW
CLEVIS PIN
Figure 8
7
Please contact 1-800-654-3545 for further assistance
(UNTWISTED)
8" DOWNROD
HAIRPIN
CLIP
HAIRPIN CLIP
DOWNROD
MOTOR COUPLER
emersonfans.com
ETL Model No.: CF766L
CLEVIS
PIN