Using Your Ceiling Fan - Emerson 4th AVENUE CF766LBQ00 Mode D'emploi

USING YOUR CEILING FAN

Your Wall Control has full control of your Fan and Light.
10.1
To set the desired Fan Speed, press one of the four
Buttons ( . , .. , ... , .... ) to operate your Fan on from low to
High Speeds (Figure 35).
10.2
To turn the Light on and off, press and release the
LIGHT ( ) Button.
10.3
To set the Light Intensity, press and hold the LIGHT
( ) Button. The Light will turn on at the Light Intensity
previously selected.
10.4
Your Fan is now Wired to be turned on and off from the
Fan Switch.
10.5
Restore Electrical Power to the Outlet Box by turning
the Electricity on at the Main Fuse Box.
All Fans are shipped from the factory with the Reverse
Switch positioned to the "left" circulate air downward.
If airflow is desired in opposite direction, turn your Fan
OFF and wait for the Blades to stop turning, then slide
the Reverse Switch to the "right" position, and turn Fan
on again (Figure 36).
The Fan Blades will turn in the opposite direction and
reverse the airflow.
Reverse Switch Information
Season Rotation Direction
Summer Counter-Clockwise
Winter Clockwise
10. Using Your Ceiling Fan
Switch Position
Left
Right
!
Fan installation must be completed, including the
installation of the fan blades, before testing the wall
control.
POWER
INDICATOR
LIGHT
LIGHT
BUTTON
FAN
BUTTON
OFF
Figure 35
Figure 36
!
To reduce the risk of fire or electrical shock, do not
use this fan with any solid-state speed control device.
24
WARNING
....
HIGH TO LOW
BUTTONS
ON
ON/OFF SWITCH
O = OFF / — = ON
REVERSE
SWITCH
WARNING
ETL Model No.: CF766L