Hilti TE 3000-AVR Mode D'emploi page 12

Status
"Ready for operation" indicator shows green.
Bring the product to Hilti Service in good time. This will help to ensure that it's always ready for use.
3.6 Active Vibration Reduction
The tool is equipped with an Active Vibration Reduction (AVR) system which reduces vibration noticeably.
3.7 Items supplied
Electric breaker, operating instructions, grease.
The transport trolley is available as an accessory.
Other system products approved for use with this product can be found at your local Hilti Store or at:
www.hilti.group
4 Technical data
For details of the rated voltage, current, frequency and/or input power, please refer to the power tool's
country-specific type identification plate.
When powered by a generator or transformer, the generator or transformer's power output must be at least
twice the rated input power shown on the rating plate of the power tool. The operating voltage of the
transformer or generator must always be within +5% and -15% of the rated voltage of the power tool.
Weight in accordance with EPTA procedure 01
Single impact energy in accordance with the EPTA procedure
Storage temperature
Ambient temperature for operation
4.1 Noise information and vibration values in accordance with EN 60745
The sound pressure and vibration values given in these instructions were measured in accordance with a
standardized test and can be used to compare one power tool with another. They can also be used for a
preliminary assessment of exposure. The data given represents the main applications of the power tool.
However, if the power tool is used for different applications, with different accessory tools, or is poorly
maintained, the data can vary. This can significantly increase exposure over the total working period. An
accurate estimation of exposure should also take into account the times when the tool is switched off, or
when it is running but not actually being used for a job. This can significantly reduce exposure over the
total working period. Identify additional safety measures to protect the operator from the effects of noise
and/or vibration, for example: Maintaining the power tool and accessory tools, keeping the hands warm,
organization of work patterns.
Noise information
Sound power level (L
WA
Uncertainty for the sound power level (K
Sound pressure level (L
Uncertainty for the sound pressure level (K
Vibration information
Chiseling (a )
h, Cheq
Uncertainty (K)
6 English
)
)
WA
)
pA
)
pA
Meaning
Product is ready for use.
2228669
*2228669*
TE 3000­AVR
27.1 kg
85 J
−20 ℃ ... 70 ℃
−20 ℃ ... 55 ℃
106 dB(A)
3 dB(A)
95 dB(A)
3 dB(A)
6.9 m/s²
1.5 m/s²