Publicité
Les langues disponibles
Les langues disponibles
Problem
• Unit will not start.
• Paddle will not
depress.
• Dust is not
being collected.
For assistance with your product, visit our website www.blackanddecker.com for the
location of the service center nearest you or call the BlACK+DECKER help line at
1-800-544-6986.
TROUbLEShOOTING
Possible Cause
• Cord not plugged in.
• Circuit fuse is blown.
• Circuit breaker is tripped.
• Cord or switch is damaged.
• lock on/ lock off slider is in
locked position.
• Sandpaper holes do not align. • Use sandpaper with the
• Dust canister is full.
Imported by:
Black & Decker (U.S.) Inc.,
701 E. Joppa Rd.
Towson, MD 21286 U.S.A.
Possible Solution
• Plug tool into a working outlet.
• Replace circuit fuse.
(If the product repeatedly causes
the circuit fuse to blow, discontinue
use immediately and have it
serviced at a BlACK+DECKER service
center or authorized servicer.)
• Reset circuit breaker. (If the
product repeatedly causes the
circuit breaker to trip, discontinue
use immediately and have it
serviced at a BlACK+DECKER service
center or authorized servicer.)
• Have cord or switch replaced at
BlACK+DECKER Service Center or
Authorized Servicer.
• Slide the lock on/ lock off slider
left to the unlocked position.
appropriate hole configuration.
• Separate dust canister and gently
shake or tap to empty.
7
Publicité
