q
q
S.S.
Stitch Length Dial
Turn the stitch length dial to set the desired stitch
length at the setting mark.
The higher the number, the longer the stitch
length
q Setting mark
• "
" is the recommended setting for buttonhole
stitching.
• Adjust the dial in the 0.5–4 range when you sew
the zigzag stitch.
Adjusting Stretch Stitch
Set the stitch length control at "S.S." to sew the
stretch stitch pattern sewing.
If the stretch stitch pattern is uneven, turn the
stitch length diial in the direction of "–" to
compress it, or "+" to expand it.
Reverse Stitch Button
As long as you keep the reverse stitch button
depressed, the machines sew in backwards.
Darning Plate
To set the darning plate:
Position the darning plate with the 3 pins on the
bottom.
Fit the darning plate pins into the needle plate
holes. The feed dogs will show through the darning
plate holes.
20