Maintenance By The User - Abus FUBW50120 Instructions D'installation Et D'utilisation

Maintenance
The detector should be checked once a year. During every inspection:
• Check the detector for visible signs of damage on the housing or the front cover.
• Check the condition of the tamper switch.
• Check the detector for visible signs of damage or wear.
• Clean your detector.
• Check the condition of the batteries.
• Check the charging status of the batteries
• Replace the batteries when recommended by the manufacturer
• Test the detector.
• Check the signal strength
• Test the communication.
• EN 50131-7 "Alarm systems – intrusion and hold up alarms – part 7: application rules" must
also be taken into consideration.
It is not necessary to check any calibrations or adjustments.

Maintenance by the user

• Clean the exterior of the detector.
• The user does not need to carry out any other maintenance work.
• The user can test the detector using the alarm panel's user menu (walk test).
58 | E N