Changing The Number Of Compartments - FAS International 480 ELE Mode D'emploi

16
NOTE: It is not necessary to remove the drum of the vending machine to change the number of
compartments.



Absence of plug covering the hole.

9.3 -CHANGING THE NUMBER OF COMPARTMENTS

1) Open the main door to access the drum column.
2) Unhook the lefthand front grate in steel ref.B fig.10.
3) To add dividers, insert the divider blades into the central hub of the drum fig. 11.
4) Rotate the drum below the one being modified to aligne the large diameter hole of the upper
ring with the blade to add fig. 12.
5) Insert the connecting rod through the large hole and tighten up using the special spanner
provided with each machine.
6) For the bottom drum use the hole on the cabinet floor ref. A fig. 10, after having taken position
as to it.
7) Clamp the dividers in the same way.
8) Plug all the holes which have to be closed, as shown in fig. 9
9) Replace the lgrate in stainless steel.
10) Adjust the sliding plates as to the created spaces as previously described in paragraph
"SELECTION COMPARTMENTS" and as schematized in fig. 7 ref A.
N.B. All these procedures can be facilitated removing the drums from the machine as described in
the following paragraph.
FAS INTERNATIONAL srl
COMPARTMENT DIVISION fig. 9
fig. I