LEMI PODO SLINDER Notice D'utilisation page 8

6. OPTION ON DEMAND
6.1. Foot tray
Insert the white foot tray on its support fixed on the leg. Pay attention to remove foot
tray when you move down the legs in order to avoid any crushing.
6.2. Rollholder
The chair can be equipped with a roll holder, which is installed by using specific strings fixed to two screws on the
backrest.
6.3. Wheels
You can install the braked wheels on the chair by unscrewing the fixed feet.
Always block the brake of each wheel before the client sit on the chair.
7. INSTRUCTION FOR USE
7.1. Operator
The chair is controlled by an operator through the foot pedal with cable; the operator must position themselves so as
to have complete view of the controlled parts and of the patient.
WARNING! During the functioning of the chair the operator should always remain in the vicinity of
the controls; it is forbidden to leave the chair unattended during its operation.
Operators should pay attention to avoid creating potentially dangerous situations for their own or
other's safety.
All people working on the chair must be properly trained on the correct methods of work and infor-
med about its proper functioning. They also need to be aware of the parts of this documentation
relevant to their work.
Operators must not wear clothes with drapes that could get caught by moving part of the chair.
Proper clothing is made of close-fitting garments, especially on the upper limbs.
Nor the operator and the patient must wear rings, necklaces, bracelets, wristwatches, ties or other
objects that could get caught by moving parts of the machinery. In case of allergy, cover the chair with
a sheet. The operator must stand in order to always control all the adjusted parts and also the patient.
7.2. Use of mattress
IMPORTANT! It is mandatory to cover and protect the mattress with disposable paper covers or washable
sponge covers for its correct and hygienic preservation. The upholstery could be damaged by the normal
heat of the skin or by a prolonged use of essential oils or cosmetic product. Any replacement caused by da-
mages due to misuse won't be considered under warranty.
7.3. Controls
The chair can be controlled by a pedal with cable. All the controls work only when activated: the chair movement will
stop as soon as the operator releases the pedal, except for the AUT (Automatic return to the initial position) which can
be stopped by pressing any pedal
The operator only can use controls to move the chair
8