Organisational Measures Of The User Company - Dini Argeo OCSF Manuel D'entretien

Organisational measures of the user company

- Respect the safety measures established by the manufacturer of the electronic crane scale,
the manufacturer of the lifting device, and eventually of the safety board of the product to be
weighed.
- The electronic crane scale must be used only for the foreseen purposes.
- Entrust the use of the instrument only to expert and trained people, also with experience in
using the lifting equipment.
- Entrust the execution of installation, putting into function, maintenance, and repair operations
only to specialised personnel
- Make sure that the user manual is always available where the scale is used.
- The nominal capacity of the scale must be equal or greater than the crane. If the nominal
capacity of the scale is greater than the maximum capacity of the crane, make sure that
loads, which are greater than the maximum capacity of the crane or of any support element
of the load, are lifted.
- Use only original spare parts.
- Do not remove or replace shackles and hooks supplied.
- All the indicator connections must be made respecting the norms applied in the installation
zone and environment.
- The electronic crane scale must be submitted to regular maintenance and repair
interventions
- When one notices anomalies while using the electronic crane scale, IMMEDIATELY stop all
operations and do not reuse the instrument until the instrument has been submitted to
specific controls by specialised and authorised personnel.
Incorrect use, but reasonably foreseeable, by untrained people entails a non acceptable residual risk.
6