Dini Argeo OCSF Manuel D'entretien page 5

DO NOT exceed the nominal capacity of the crane scale.
(The illustration refers to the model 6t. Refer to the maximum
capacity of the purchased instrument).
The nominal capacity of the electronic crane scale must not be
lower than the maximum capacity of the lifting device.
DO NOT exceed the nominal capacity of any support element of
the load if lower than the capacity of the crane scale.
Use the scale EXCLUSIVELY for the lifting and the weighing of
suspended loads and for TENSION measurements.
Suspended loads which may cause applied torsion stresses
MUST be hung with flexible or swivelling bindings.
Carefully respect all the safety measurements established by
the manufacturer of the electronic crane scale, which are shown
in the instruction manual.
4