Dini Argeo OCSF Manuel D'entretien page 6

The crane scale is to be considered like a scale, and therefore it must be used only for
weighing needs. The crane scale is not designed for cargo handling and transportation.
Once the load harnessing operation is done, move away and make sure that the load is well
balanced lifting it up only a few centimetres from the ground and then lift the load down to the
ground again. Remove the crane scale at the end of the weighing operation. An improper or
different use than what is foreseen in this manual, will release the Manufacturer from all
responsibilities in case of damages caused to people or
Entrust the installation, set-up, maintenance, operations only to
trained personnel. Entrust the execution of maintenance
operations only to trained personnel in security controls for
lifting devices.
DO NOT spill liquid on the instrument. Respect the IP degree
protection of the instrument.
DO NOT use solvents or industrial chemicals for cleaning the
instrument.
5
things.