Regular Maintenance - Dini Argeo OCSF Manuel D'entretien

Regular Maintenance

Maintenance should be carried out only by persons who have acquired the necessary
technical expertise and are specialized and trained for this purpose.
Every 3 months
Every 12 months
- Check the wear on the handle or the eyelet, by
checking if there are any plastic deformations,
mechanical damages(irregular), cracks, corrosion,
damage to threaded portions and the twists;
- Check the tightness of the splice plate on the hook,
and the presence of defects, and ensure its proper
functioning;
- Make sure that the split pin and the shackle nuts are
firm;
- If other metrological and mechanical irregularities
are detected, have the electronic crane scale
repaired by qualified personnel (authorized
assistance service).
An incorrect measurement of weight may be a sign
of a mechanical problem with the crane scale. If the
crane scale weighs incorrectly, the crane scale must
be repaired by skilled personnel (Authorized Service
Center).
Do not for any reason carry out the repair by
yourself.
In case of non-compliance turn immediately off the
electronic crane scale.
All repair operations and the parts used are
classified and stored in the maintenance register.
All of the elements that transmit the load, including the
load cell, should be checked by specialised personnel
qualified in inspection and maintenance of cranes and
bridge cranes.
12