AEG FAVORIT 54000 I Notice D'utilisation page 35

German degrees
(°dH)
11 - 14
4 - 10
< 4
1) Factory position.
2) Do not use salt at this level.
You must adjust the water softener manually and electronically.
Manual adjustment
Turn the water hardness dial to the position 1 or
2 (refer to the table).
Electronic adjustment
Make sure that the appliance is deactivated.
1. Press and hold the Multitab button .
2. Turn the programme knob counterclockwise until the programme marker is aligned
with the first washing programme on the control panel.
3. Release the Multitab button when the display shows the set level of the water soften-
er (example: the display shows
4. Press the Multitab button again and again until the display shows the new level.
5. Deactivate the appliance to confirm the adjustment.
If the water softener is set electronically to the level 1, the salt indicator stays off.
All manuals and user guides at all-guides.com
Water hardness
French degrees mmol/l
(TH°)
19 - 25 1,9 - 2,5
7 - 18 0,7 - 1,8
< 7 < 0,7
= level 5.
Setting the water softener
Water hardness ad-
justment
Clarke de- manually
grees
13 - 17 1
5 - 12 1
< 5
2)
1
35
elec-
troni-
cally
3
2
2)
1