English - Kenwood AT320A Mode D'emploi

Use the mini chopper/mill to mill
such things as spices, herbs, nuts,
baby food, salad dressings, cooked
fruit, biscuits, bread and coffee
beans.
before using your Kenwood
attachment
Read these instructions carefully and
G
retain for future reference.
Remove all packaging and any
G
labels.
safety
Don't touch the sharp blades. Keep
G
the blade unit away from children.
Only use the jar and the blade unit
G
with the base supplied.
Never blend hot liquids in the mini
G
chopper/mill.
Never remove the mini chopper/mill
G
until the blades have completely
stopped.
Never attempt to fit the blade unit to
G
the machine without the jar fitted.
Unplug the appliance before fitting or
G
removing parts or cleaning.
Only use the attachment for its
G
intended domestic use.
Never leave the appliance
G
unattended when it is operating.
Never run the mini chopper/mill for
G
longer than two minutes - it will
overheat.
Switch off as soon as you have the
G
right consistency. Spices take less
than one minute.
Don't mill turmeric - it's too hard.
G
Break ginger up before milling.
G

English

Refer to your main kitchen machine
instruction book for additional safety
warnings.
This appliance conforms to EC
G
directive 2004/108/EC on
Electromagnetic Compatibility and
EC regulation no. 1935/2004 of
27/10/2004 on materials intended
for contact with food.
before use
Wash the parts: see 'cleaning'
key
base
rubber seal
blade unit
milling jar
assembled mini chopper/mill
storage jar and lid (4 supplied)
to use the mini
chopper/mill
1 Put your ingredients into the jar.
Don't fill above the maximum level
indicated on the jar.
2 Ensure the rubber seal is snugly in
place on blade unit.
3 Turn the blade unit upside down.
Lower it into the jar, blades down.
4 Screw the base onto the jar until it's
finger-tight.
5 Remove the high speed outlet
cover
6 Place the mini chopper/mill over the
outlet, turn clockwise and at the
same time push down until the
attachment engages
further clockwise until the unit locks
into position.
2
.
. Then turn