Effect Section - PIONEER DJ DDJ-RR Mode D'emploi

7 Channel fader
Move:
Adjusts the level of audio signals output in each channel.
[SHIFT] + move:
Use the channel fader start function.
8 Crossfader
Outputs the sound assigned with the crossfader assign switch.
[SHIFT] + move:
Uses the crossfader start function.
9 MASTER LEVEL control
Adjusts the master sound level output.
a Master level indicator
Displays the master output's audio level.
b Booth monitor level control
Adjusts the level of audio signals output from the [BOOTH] terminal.
c HEADPHONES MIXING control
Adjusts the balance of the monitor volume between the sound of the
channels for which the headphones [CUE] button is pressed and the
sound of the master channel.
d SAMPLER SYNC button
Synchronizes the sampler deck's tempo with the master
deck's tempo.
! Only a sampler slot with the PLAY mode set to [Loop] synchro-
nizes the tempo with the master deck's tempo.
[SHIFT] + press:
Sets the sampler deck as the master for synchronization.
e SAMPLER CUE button
Turns monitoring of the sampler deck's sound on or off.
[SHIFT] + press:
Sets the sampler deck's tempo by tapping the button.
! Only a sampler slot with the PLAY mode set to [Loop] will be the
same tempo as the BPM value on the sampler panel.
f SAMPLER VOLUME control
Adjusts the sampler's overall sound level.
10
En

Effect section

1
3
1 Effect parameter controls
Adjusts the beat FX parameter.
2 RELEASE FX control
Turn:
Switches the types of release FX.
Press:
The release FX is on while the control is pressed.
! If the release FX turns on, the beat FX in the same effect unit
turns off.
[SHIFT] + turn:
Adjusts the beat FX time parameter.
[SHIFT] + press:
Switches the beat FX mode.
3 Effect parameter buttons
Press:
Turns the beat FX on and off or switches the parameters.
[SHIFT] + press:
Switches the types of beat FX.
4 BEATc button
Decreases the beat fraction for synchronizing the beat FX effect
sound each time the button is pressed.
[SHIFT] + press:
Sets the beat FX tempo mode to the BPM auto mode. The
track's BPM value is used as the basis for the effect's tempo.
5 BEATd button
Increases the beat fraction for synchronizing the beat FX effect
sound each time the button is pressed.
[SHIFT] + press:
Sets the beat FX tempo mode to the BPM tap mode. The BPM value
used as the basis for beat FX is calculated by the interval at which
the button is tapped.
1 1 2
3 3 4 5