Panasonic HL-CX667S Mode D'emploi Et Notice D'installation page 5

All manuals and user guides at all-guides.com
Do not connect the power
voltage other than 120 V/240 V or
120 V/208 V AC, may cause fire or
electric shock�
The appliance must not be
installed behind a decorative door
in order to avoid overheating�
Installation and servicing must be
carried out by competent persons
in accordance with the regulation
in force�
Before the appliance is operated,
all the protective film applied
must be removed (apart from the
Name Plate)�
Take care that no objects are
stuck in the door of the oven�
The appliance becomes very hot
during use� Suitable heat-proof
gloves should be worn when
handling�
All cooking operations must take
place with the door closed�
When the oven is first switched
on, it may emit an unpleasant
smell� This is due to the bonding
agent used for insulating panels
within the oven� Please heat
up the new empty appliance
with the conventional cooking
function, at 480 °F (250 °C) for
15 - 20 minutes in order to remove
any manufacturing residues� Be
sure to ventilate when performing
this heating� It is normal that there
will be a slight smoke and odors�
WARNING
Do not disassemble the unit for
reconstruction�
Do not discard the packaging
or any part of it, or leave it
unattended� It can constitute a
suffocation hazard for children,
especially the plastic bags�
CAUTION
Never obstruct the openings and
slits provided for ventilation and
heat release�
Spray cleaner is not to be used
for cleaning�
Do not use harsh abrasive
cleaners or sharp metal scrapers
to clean the oven door glass,
since they can scratch the
surface, which may result in
shattering of the glass�
A steam cleaner is not to be used�
Do not use this appliance for
heating rooms�
Do not rest any weight or sit on
the open door of the appliance�
The Name Plate with the technical
data, serial number and brand
name has been visibly affixed to
the appliance�
DO NOT REMOVE THE NAME
PLATE FOR ANY REASON�
Do not allow residues of sugary
foods (such as jam) to set inside
the oven since they might damage
the enamel lining of the oven�
EN-3