To Assemble Pasta Press Accessory - KitchenAid KPEXTA Instructions Et Recettes

To Assemble Pasta Press Accessory

A
B
A - Housing
B - Cutter
C - Auger
D - Pasta Ring
E - Storage Case
1. Place the press upside down on a
counter or table, and insert the end
of the auger with the cross-shaped
peg (C) into the press housing (A),
aligning the cross-shaped peg with the
matching indentation inside. When
correctly positioned, the top of the
auger will be flush with the opening.
E
C
F
SPAGHETTI
G
D
H
F - Spaghetti Plate
G - Bucatini Plate
H - Rigatoni Plate
I - Fusilli Plate
J - Large Macaroni Plate
2. Place one of the pasta plates (F, G, H,
3
I
FUSILLI
J
BUCATINI
K
RIGATONI
SMALL MACARONI
K - Small Macaroni Plate
L - Combo Tool
M - Cleaning Brush
I, J or K) over the opening, aligning its
center with the auger, matching the
tabs of the plate with the notches in
the press housing.
RIGATONI
L
M