Eaton 93PS Mode D'emploi page 12

2.2.1
EN
Before you install the UPS system, read and understand how these instructions apply to
the system that you are going to install. Use the procedures and illustrations provided to
create a logical plan for installing the system.
2.2.2
For the UPS system to operate at peak efficiency, the installation site must meet the
environmental parameters outlined in the Eaton 93PS UPS 8-40 kW User's and Installation
Guide.
2.2.2.1 Environmental and installation considerations
The installation environment must meet the UPS weight and size requirements provided in
Tables 1 and 2.
The dimensions of the UPS cabinet are shown in illustration 2. Note that the depth
dimension (750 mm) includes cable glands.
Table 1. UPS cabinet weights with cardboard packaging
Shipping weight
Installed weight
Floor loading
* Note that maximum internal batteries are included with all the models.
The UPS cabinets use forced air cooling to regulate internal component temperature. By
default, air inlets are in the front of the cabinet and outlets are in the back, see
illustration 3. Allow clearance in front of and behind each cabinet for proper air circulation.
Make sure that the cooling air that enters the UPS does not exceed +40 °C. For ventilation
requirements, refer to the Eaton 93PS UPS 8-40 kW User's and Installation Guide.
Table 2. UPS cabinet minimum clearances
From the top of the cabinet
From the front of the cabinet
From the back of the cabinet
From the side of the cabinet
The recommended ambient operating temperature and humidity for the UPS system is
shown in illustrations 4.1 and 4.2. An ambient temperature from +20 °C to +25 °C is
recommended to achieve a long life of VRLA batteries.
4
Creating an installation plan
Site preparations
1 007 kg/m2
C-model 8-20 kW
8-20 kW
293 kg
280 kg
310 kg/m
8-20 kW
500 mm
500 mm
150 mm
0 mm
30-40 kW
98 kg
558 kg
86 kg
532 kg
2
1 478 kg/m2
30-40 kW
500 mm
650 mm
250 mm
0 mm