1. Oil dipstick
2. Upper mark
3. Lower mark
6.
Install the oil filler cap and tighten it com-
pletely.
7.
Install the top cowling.
EMU27154
Engine
Check the engine and engine mounting.
Look for loose or damaged fasteners.
Check the propeller for damage.
Check for engine oil leaks.
EMU39862
Installing top cowling
1.
Check the rubber seal for damage. If the
rubber seal is damaged, have it replaced
by a Yamaha dealer.
2.
Align the fuel tank cap and manual start-
er handle with their respective holes in
the top cowling.
1. Fuel tank cap
2. Manual starter handle
3. Rubber seal
3.
1
2
3
ZMU06737
1. Hook
4.
5.
1
1. Cowling lock lever
6.
2
3
ZMU07615
Hook the top cowling hook onto the bot-
tom cowling, and then make sure that
the fuel tank cap and manual starter han-
dle fit properly into their respective holes.
Check to be sure the rubber seal is seat-
ed correctly between the top cowling
and the bottom cowling.
Pull the cowling lock lever down to se-
cure the top cowling.
Check the fitting of the top cowling by
pushing it with both hands. NOTICE: If
the top cowling is not installed cor-
rectly, water spray under the top
cowling can damage the engine, or
the top cowling can blow off at high
speeds.
[ECM01992]
Operation
1
ZMU06857
1
ZMU06738
35