Linz electric SL Serie Mode D'emploi Et D'entretien page 22

Recommended position anti-building mounting (PRO 18L)
Antivibrating
Antivibrating
Antivibrating
Fig. 5
2) Remove the rotor's locking elements on the non-driving end side.
3)
Place the alternator next to the drive engine, as illustrated in figure 6.
4) Centre and secure the stator frame to the drive engine's flange using
suitable screws, as shown in figure 7.
Fig. 6
Fig. 7
5) Centre and secure the rotor coupling disc to the drive engine's flywheel
- 22 -
using appropriate screws, working through the air outlets as indicated
in figure 8.
Fig. 8
Fig. 8/A
Turn the rotor as shown in figure 8/A.