Emergency Operation For Wireless Remote-Controller; Care And Cleaning; Filter Information - Mitsubishi Electric CITY MULTI PLFY-P VEM-E Série Manuel D'utilisation

5. Emergency Operation for Wireless Remote-controller

E

6. Care and Cleaning

Filter information

Fri
Room
Cool Set temp. Auto
Mode Temp. Fan
Main Main menu
Restriction
Energy saving
Night setback
Filter information
Error information
Main display:
Cursor Page
F1 F2 F3 F4
Filter information
Please clean the filter.
Press Reset button after
filter cleaning.
Main menu:
Reset
F1 F2 F3 F4
14
C D
B A
will appear on the Main display
in the Full mode when it is time to
Wash, clean, or replace the lters
when this sign appears.
Refer to the indoor unit Instruc-
tions Manual for details.
Select "Filter information" from the
Main menu (refer to page 8), and
press the [SELECT] button.
sign.
Refer to the indoor unit Instructions
When the remote controller cannot be used
When the batteries of the remote controller run out or the remote
controller malfunctions, the emergency operation can be done using the
emergency buttons on the grille.
A DEFROST/STAND BY lamp
B Operation lamp
C Emergency operation cooling switch
D Emergency operation heating switch
E Receiver
Starting operation
seconds.
seconds.
Notes:
Details of emergency mode are as shown below.
Details of EMERGENCY MODE are as shown below.
Operation mode
Set temperature
Fan speed
Airflow direction Horizontal
Stopping operation
than 2 seconds.
Caution:
To prevent falls, maintain a stable footing when operating the unit.
Filter information
Reset filter sign?
Cancel
OK
F1 F2 F3 F4
Filter information
Filter sign reset
Main menu:
Navigating through the screens
To go back to the Main menu ................ [MENU] button
To return to the previous screen ........... [RETURN] button
Fri
Room
Cool Set temp. Auto
Mode Temp. Fan
button C for more than 2
button D for more than 2
B means the start of operation.
COOL HEAT
24 °C 24 °C
High High
Downward
button C or the button D for more
Select "OK" with the [F4] button.
When the is displayed on the
Main display in the Full mode, the
system is centrally controlled and