Specifications; Serial Number - Mitsubishi Electric CITY MULTI PLFY-P VEM-E Série Manuel D'utilisation

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 34
7. Troubleshooting
Having trouble?
The operation lamp near the receiver for the wireless remote controller
on the indoor unit is flashing.
Warm air blows from the indoor unit intermittently when heating mode is
off or during fan mode.
Range of application
The range of working temperatures for both the indoor and outdoor units of the series Y, R2, Multi-S is as below.
Warning:
If the air conditioner operates but does not cool or heat (depending on model) the room, consult your dealer since there may be a
refrigerant leak. Be sure to ask the service representative whether there is refrigerant leakage or not when repairs are carried out.
The refrigerant charged in the air conditioner is safe. Refrigerant normally does not leak, however, if refrigerant gas leaks indoors and
comes into contact with the fire of a fan heater, space heater, stove, etc., harmful substances will be generated.

8. Specifications

PLFY-P·VEM-E Series
Model
Power source
Capacity(Cooling/Heating)
Dimension(Height)
Dimension(Width)
Dimension(Depth)
Net weight
(Low-Middle2-Middle1-High)
Noise level (SPL)
(Low -Middle2-Middle1-High) <dB>
Note:
*
Operation temperature of indoor unit.
Cooling mode: 15 °C WB - 24 °C WB
Heating mode: 15 °C DB - 27 °C DB
*1 Cooling/Heating capacity indicates the maximum value at operation under the following condition.
Cooling: Indoor 27 °C DB/19 °C WB, Outdoor 35 °C DB
Heating: Indoor 20 °C DB, Outdoor 7 °C DB/6 °C WB
*2 This figure ( ) indicates standard panel's.

9. Serial number

The serial number is indicated on the SPEC NAME PLATE.
Month of manufacture: A (1), B (2), C (3), D (4), E (5), F (6), G (7), H (8), J (9), K (10), L (11), M (12)
P20
P25
<kW>
2.2/2.5
2.8/3.2
<mm>
<mm>
<mm>
<kg>
12-13-14-15
<m
/min>
3
24-26-27-29
Here is the solution. (Unit is operating normally.)
The self diagnosis function has operated to protect the air conditioner.
Turn off the power switch immediately and consult your dealer. Be
sure to provide the dealer with the model name.
When another indoor unit is operating in heating mode, the control
valve opens and closes occasionally to maintain stability in the air
conditioning system. This operation will stop after a while.
* If this will cause an undesirable rise in the room temperature in
small rooms, etc., stop the operation of the indoor unit temporarily.
P32
P40
P50
~N/ 220-230-240/50, 220/60
3.6/4.0
4.5/5.0
5.6/6.3
258(40)
840(950)
840(950)
19(5)
13-14-15-16 13-14-15-17 13-14-16-18 14-15-16-18 14-17-20-23 20-23-26-29 22-26-30-35
26-27-29-31
P63
P80
P100
7.1/8.0
9.0/10.0
11.2/12.5
298(40)
21(5)
28-29-30-32 28-31-34-37 34-37-39-41 35-39-42-45
P125
14.0/16.0
24(5)
17

Publicité

Table des Matières
loading

Table des Matières