Oase Eco Control Notice D'emploi page 7

Menu: Aquarius Eco Expert pump
When the Aquarius Eco Expert pump is connected, the following menus and setting possibilities are available.
AQUARIUS 28000
PUMP OFF
AQUARIUS 28000
PUMP 100 %
AQUARIUS 28000
DFC MODE SCENE 1
DFC MODE OFF
DFC MODE SCENE 1
POWER 250 W
RPM 2300/MIN
RUNTIME 45 H
SN 1234567890
SET DFC SCENE 1
›
DFC MODE – OFF
SET DFC –› SCENE 1
DFC MODE ON
SET DFC –› SCENE 12
DFC MODE ON
Description
 Connected pump (e.g. Aquarius 28000)
 The pump is switched off.
Setting
 Switch on the pump via the ON/OFF button.
 Connected pump (e.g. Aquarius 28000)
 The pump is switched on.
Operating modes
 SPEED: The speed is shown as a percentage (DFC is deactivated).
 DFC MODE: DFC is activated (it is not possible to adjust the speed).
– DFC mode (SCENE 1 ... SCENE 12)
Adjustment (only for SPEED)
 Change the speed using the arrow keys.
0 %: Min. speed, 100 %: Max. speed
Only display
 DFC (Seasonal Flow Control)
– ON: Activated
– OFF: Deactivated
 DFC-MODE (SCENE 1 ... SCENE 12)
– DFC deactivated: No display
 Select the next display using the arrow keys.
Only display
 Current power consumption of the pump in watts
– Display precision: ±5 % of the max. pump capacity
 Current speed of the pump in rpm
 Select next/previous display using the arrow keys.
Only display
 Total pump operating time in hours
 Pump serial number
 DFC is switched off.
Setting
 Switch on DFC
 DFC is switched on, program 1 is selected
Setting
 Program selection (SCENE 1 ... SCENE 12) and switching DFC off using the
arrow keys
- EN -
7