Packing And Unpacking - Zhermack furnace DM Serie Manuel De L'utilisateur

CHAPTER 5: TRANSPORT AND MOUNTING
WARNING
5.1
To prevent any injury to persons or damage to things always proceed with the utmost
care and attention when handling the equipment. Observe all the precautions and
instructions contained in the following paragraphs.

PACKING AND UNPACKING

5.2
All the material is thoroughly checked by the Manufacturer prior to shipment. When you
receive the goods make sure they have not been damaged during transit and that no-one has
tampered with the packaging and removed any of the parts contained therein. Should you note any
damage or missing parts please inform your Dealer and the shipping carrier immediately: take
photographs and send them on to both dealer and carrier. The packaging, consisting of a cardboard
box with internal expanded plastic padding, contains:
• DM series oven;
• standard equipment for each model (see section 4.1.2);
• this Use and Maintenance Manual;
• the quick guide.
IMPORTANT: Always keep the original product packaging throughout the guarantee
period. You will need the packaging if the product has to be returned to the Service
Centre for repairs or replacement in the event of manufacturing defects or malfunction
(with the exception of wilful damage, negligence, failure to perform routine
maintenance or damage during transport). If you are not in possession of the original
packaging, contact Zhermack and ask for instructions (possible repackaging costs
will be charged on delivery). The customer is responsible for all costs associated with
unsuitable packaging of the product to be returned to the manufacturer. Zhermack is
not liable for faults, malfunctions or damage to the product deriving from or
consequent to the use of unsuitable packaging, or packaging not of a quality equal to
or better than the packaging used for the original shipment.
The equipment is not supplied with pincers, gloves or protective glasses; however,
the operator must be in possession of these items in order to utilise the equipment.
152 of 272
MAINTENANCE AND USE MANUAL
EN
FURNACE DM