Identification Data; On-Equipment Labels And Symbols - Zhermack furnace DM Serie Manuel De L'utilisateur

MAINTENANCE AND USE MANUAL
The equipment described in this manual has an ID platelet giving information about both the
equipment and the manufacturer:
A
Zhermack S.p.A. - via Bovazecchino, 100
45021 Badia Polesine (RO) Italy - Tel. +39 0425 597 611
B
D
380V~50/60Hz 7500W
The equipments has been built in compliance with the EC directives listed in the enclosed "EC
declaration of conformity". When requesting spare parts, information or assistance from your
Authorised Servicing Centre always quote the data on the ID plate.
Should the ID plate deteriorate and become illegible, even partially, order a replacement plate from
the manufacturer: remember to quote the relevant data.
Do not remove and/or damage the plate as you must be able to read the data at all
times.
The following symbols are applied on the equipment:
ATTENZIONE! DANGER OF AN ELECTRICAL
CURRENT. DO NOT OPEN DOORS OR REMOVE
DISCONNECTED THE PLUG FROM THE ELECTRICAL SOURCE.
WARNING! HOT PARTS. EXTREME DANGER.
USE PINCERS, EYE GOGGLES AND HEAT-INSULATED GLOVES.
FURNACE DM
EN
C305314 - DM 1G
SN:20000000

IDENTIFICATION DATA

A Name and address of manufacturer
B Equipment code and model
C Serial number
D Power supply information
C

On-equipment labels and symbols

PROTECTION BEFORE YOU HAVE
3.7
3.7.1
149 of 272