Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
EN
Connect your headphone
When you connect your 6.35mm headphone jack to the
preamplifier, the outputs to your amplifier are automatically
muted and the following pattern appears on the central display :
Display off mode
You can cancel the display with the «display» function of the
remote control, so that only 4 pixels appear in the corners of the
display to avoid confusion with the total unoperated mode of
your preamplifier.
48
BAL
stereo
Trigger
To synchronize the preamplifier power activation with the other
devices in your system, you can connect it via a mini-jack 3.5mm
mono connector to the trigger In (input).
To synchronize the power activation of your other devices with
your preamplifier, you can connect it through a 3.5mm mono
mini-jack connector to the trigger Out (Output).
Use 3.5mm mono mini-jack sockets
Publicité
Chapitres
Table des Matières
