Elipson REFERENCE Serie Manuel D'utilisation page 47

You will then return to the main menu of your active source and
see a slider that shows your balance setting:
LINE 1
stereo
Mute function
If you want to mute the sound during a listening session, you just
have to press briefly on the right knob when you are in the main
menu of the amplifier (displaying the source). Then, you will see
a drawing showing that the sound is muted on the display. To
deactivate the mute, briefly press again the right knob. The initial
listening volume will be restored. A button on the remote control
also allows you to do this remotely.
stereo
LINE 1
For stereo mode
To enjoy stereo listening, simply move down the slider of the switch
placed on the right hand side of the preamplifier to "stereo". A
"stereo" indication appears on the central display.
stereo
For mono mode
If you want to listen in mono, simply move up the slider of the
switch placed on the right hand side of the preamplifier to "mono".
A "mono" indication appears on the central display.
stereo
LINE 1
LINE 1
EN
47