Elipson REFERENCE Serie Manuel D'utilisation page 45

Source selection
Once the unit is turned on, the source previously used will appear
on the screen. To change sources, simply turn the knob to the
right or left. The source displayed on the screen will be the one
activated by the preamplifier. You must then press the knob to
confirm this choice
Here, the balanced input is activated:
stereo
Source display
Balanced input (XLR-In)
Line 1 unbalanced
input (RCA/CINCH)
(AN1)
Line 2 unbalanced
input (RCA/CINCH)
(AN2)
BAL
BAL
stereo
LINE 1
stereo
LINE 2
stereo
If you have the optional phono board: MPH II, a rear selector of
your MPH II module, allows you to select the type of your cartridge:
moving magnet (MM) or moving coil (MC).
PHONO
stereo MM - 47 kΩ - 40 dB
If you have the optional digital board : MDAC I
You have the choice between 3 digital inputs: USB, COAX (S/PDIF
Coaxial) and OPTO (S/PDIF Toslink) in the order of appearance.
USB
stereo
OPTO
stereo
COAX
stereo
Volume control
The volume adjustment (- 60 to +12 dB) is done by turning the right
knob. Clockwise to increase the volume and counterclockwise to
decrease it. You can also make this adjustment directly with your
remote control.
PHONO
stereo MM - 100 kΩ - 60 dB
EN
45