Setting Key Function - Samsung AE044MXTPEH Mode D'emploi

Setting key function

Setting the option
1 Press and hold K2 to enter the option setting. (Only available when the operation is stopped)
– If you enter the option setting, display will show the following. (If you have set the 'Emergency operation for
compressor malfunction', 1 or 2 will be displayed on Seg 4.)
– Seg 1 and Seg 2 will display the number for selected option.
– Seg 3 and Seg 4 will display the number for set value of the selected option.
2 If you have entered option setting, you can shortly press the K1 switch to adjust the value of the Seg 1, Seg 2 and
select the desired option. (Refer to pages 71~73 for the Seg number of the function for each option)
Example)
3 If you have selected desired option, you can shortly press the K2 switch to adjust the value of the Seg 3, Seg 4
and change the function for the selected option. (Refer to pages 71~73 for the Seg number of the function for each
option)
Example)
4 After selecting the function for options, press and hold the K2 switch for 2 seconds. Edited value of the option will
be saved when entire segments blinks and tracking mode begins.
CAUTION
• Edited option will not be saved if you do not end the option setting as explained in above instruction.
→
→
39
English