Klarstein BORMIO SMART Mode D'emploi page 25

When you press the button a second time, the LCD screen displays „2" for Tuesday.
Note: You may press this button up to seven times to set the temperature for the entire
week. If you press the key an eighth time, you will exit the menu and the screen will
show the setting for the current day of the week.
Activate the timer function
If you press the timer button, the timer function will be activated.
• When you press the button for the first time, the screen will display
indicator will light up green on the device.
• If you press the button again, the
timer indicator on the unit will turn off.
• After activating the timer function, this will be based on the respective temperature
settings.
• The LCD screen will display these set parameters:
Note: If you want to change the time, week, and timer settings, you must turn the timer
button on and off once to save the new data. When the device has received the new
data, it will beep once.
icon will disappear from the screen and the
and the timer
EN
25