Klarfit Ultimate Gym 9000 Mode D'emploi page 45

EN
11
Attach the two Pedals (88) to the two Pedal Frames (30), using four M6X40mm Bolts (109) and four M6 Washers (115). Attach two Bumper (short)
(60) to the two Pedal Frames (30). Attach the two Pedal Frames (30) to the VKR Lower Support Frame (31), using two M8X16mm Hex Bolts (108),
two Washers (113) and two Bolt
Caps (95).
Attach the two Cylinders (45) to the VKR Lower Support Frame (31), using two M8X16mm Hex Bolts (108), two Washers (113) and two Bolt Caps
(95). 4. Attach the two Cylinders (45) to the two Pedal Frames (30), using two M8X40mm Hex Bolts (107), four M8 Washers (114) and two M8
Nylon Nuts (118).
Attach the Right & Left VKR (33&34) to the VKR Lower Support Frame (31) and VKR Upper Support Frame (32), using two M10X75mm Hex Bolts
(99), four M10 Washers (112) and two M10 Nylon Nuts (117).
Attach the two Handle Tubes (15) to the Right & Left VKR (33&34), using two M10X20mm Hex Bolts (104) and two M10 Washers (112). Attach
the Backrest Cushion (46) to the VKR Lower Support Frame (31) and VKR Upper Support Frame (32), using two M8X65mm Hex Bolts (106) and
two M8 Washers (114). Attach the two VKR Arm Cushions (50) to the Right & Left VKR (33&34), using four M8X65mm Hex Bolts (106) and four
M8 Washers (114).
45