Klarfit Ultimate Gym 9000 Mode D'emploi page 35

EN
ASSEMBLY
1
Attach seven 50mm Square End Caps (78) to the Base Frame (1), the Leg Press Base Frame (2) and the VKR Base Frame (3).
Remove two M10X25mm Bolts (105) from two Weight Guide Tubes (4).
Attach two Weight Guide Tubes (4) to the Base Frame (1), using two M10X20mm Bolts (105).
Attach the Leg Press Base Frame (2) and VKR Base Frame (3) to the Base Frame (1), using two M10X75mm Hex Bolts (99), four M10 Washers
(112) and two M10 Nylon Nuts (117).
35