Klarfit Ultimate Gym 9000 Mode D'emploi page 38

EN
4
Attach the Leg Press Lower Support Frame (19) to the Leg Press Base Frame (2), using two M10X70mm Hex Bolts (100), four M10 Washers (112)
and two M10 Nylon Nuts (117).
Attach the VKR Lower Support Frame (31) to the VKR Base Frame (3), using two M10X70mm Hex Bolts (100), four M10 Washers (112) and two
M10 Nylon Nuts (117).
Attach the Leg Press Upper Support Frame (20) to the Leg Press Lower Support Frame (19), using two M10X20mm Hex Bolts (104) and two M10
Washers (112).
Attach the VKR Upper Support Frame (32) to the VKR Lower Support Frame (31), using one M10X20mm Hex Bolts (104) and one M10 Washers
(112).
Attach the Leg Press Upper Support Frame (20) and VKR Upper Support Frame (32) to the Upper Cross Beam (18), using two M10X75mm Hex
Blots (99), four M10 Washers (112) and two M10 Nylon Nuts (117).
38