Télécharger Imprimer la page

Electrolux EN2400AOW Manuel D'utilisation page 65

Masquer les pouces Voir aussi pour EN2400AOW:

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 110
problem
Water flows into
the refrigerator.
Water flows on
the ground.
There is too much
frost and ice.
The temperature in the
appliance is too low.
The temperature in the
appliance is too high.
The temperature in the
refrigeration is too high.
The temperature in
the freezer is too high.
The appliance does
not operate.
The lamp does not work.
If your appliance is still not working properly after making the above checks, contact the
After Sales Centre.
possible cause
The water outlet is clogged.
Products prevent
that water flows into
the water collector.
The melting water
outlet does not flow
in the evaporative tray
above the compressor.
Products are not
wrapped properly.
The door is not closed
correctly.
The Temperature regulator
may be set incorrectly.
The Temperature regulator
may be set incorrectly.
The Temperature regulator
may be set incorrectly.
The door is not
closed correctly.
The product temperature
is too high.
Many products are stored
at the same time.
There is no cold air circu-
lation in the appliance.
Products are too near to
each other.
The appliance is switched off.
The mains plug is not
connected to the mains
socket correctly.
The appliance has no
power. There is no voltage
in the mains socket.
The lamp is in stand-by.
The lamp is defective.
ENGLISH
Solution
Clean the water outlet.
Make sure that products
do not touch the rear plate.
Attach the melting water
outlet to the evaporative
tray.
Wrap the products better.
Refer to "Closing the door".
Set a higher temperature.
Set a higher temperature.
Set a lower temperature.
Refer to "Closing the door".
Let the product tem-
perature decrease to room
temperature before storage.
Store less products
at the same time.
Make sure that there is
cold air circulation in the
appliance.
Store products so that
there is cold air circulation.
Switch on the appliance.
Connect the mains plug to
the mains socket correctly.
Connect a different
electrical appliance to
the mains socket. Contact
a qualified electrician.
Close and open the door.
Refer to "Replacing
the lamp".
65

Publicité

loading

Ce manuel est également adapté pour:

En2400aoxRn2400aowEn2401aowEn2401aox