Publicité
Les langues disponibles
Les langues disponibles
6. Important
■ Discrepancy between the indoor temperature measured at the wall and the actual indoor temperature may occur.
If the following conditions are met, the use of the temperature sensor on the indoor unit is recommended.
The temperature sensor on the remote controller is not used when the controller is
connected to the Fresh Air Intake model.
■ Refer to the section on initial setting in the Installation Manual in the CD-ROM for remote controller main/sub setting.
■ Refer to the indoor unit Installation Manual for CITY MULTI for details about temperature sensor setting.
■ At the time of factory shipment, protective sheet is on the operation interface of the front cover.
Peel off the protective sheet on the operation interface prior to use.
7. Remote controller button functions
(1) ON/OFF button
(2) Function buttons
(3) MENU button
(4) RETURN button
(5) SELECT button
(6) Operation indicator
occurs.
(7) Backlit LCD
on and i
HEAD OFFICE
MANUFACTURER
controller is installed due to improper airflow distribution.
temperature and the actual indoor temperature.
(2) Function buttons
F1, F2, F3, and F4 from the left
(6) Operation indicator
(1) ON/OFF button
shown below.
1/3 Vane
·
High power
2/3 Restriction
Filter information
Error information
3/3 Maintenance
Initial setting
Service
details.
*3 If no buttons are pressed for 10 minutes on the initial
setting screens, or 2 hours on the service screens (10
been saved will be lost.
indoor unit model. For items not described in the manuals
manuals that came with the air conditioning units.
sidential, commercial, and light-industrial environment.
·
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*2 *3
*2 *3
16
Publicité
