Publicité
w
e
w
q
w
10 mm
q
q
e
r
e
q
w
Raising or Lowering the Presser Foot
By raising or lowering the presser foot lifter, the presser
foot goes up or down.
* While in operation, keep the presser foot lowered
except when threading the machine or test
running without threads.
NOTE:
Thread tension will be released when the presser foot
lifter is raised.
q Presser foot
w Presser foot lifter
Removing the Presser Foot
z Turn off the power switch and unplug the
machine.
x Turn the handwheel toward you to raise the needle.
Raise the presser foot.
c Press the lever located on the back of the foot
holder. The presser foot will drop off.
q Handwheel
w Lever
e Foot holder
Attaching the Presser Foot
z Turn off the power switch and unplug the
machine.
x Place the presser foot so that the pin on the foot
lies just under the groove of the foot holder.
c Lower the foot holder to lock the foot into place.
v Raise the presser foot lifter to check that the
presser foot is secure.
q Foot holder
w Groove
e Pin
Adjustment of Foot Pressure
It is not necessary to adjust the presser foot's pressure
for normal sewing.
When you sew heavy or lightweight fabrics, turn the
adjusting screw:
–– clockwise for heavyweight fabric.
–– counterclockwise for Iight weight fabric.
* For regular sewing, set the adjusting screw so
the head protrudes 10 mm from the top of the
machine.
q To decrease
w To increase
e Adjusting screw
r Top of the machine
10
Publicité
