Black & Decker BEMW451BH Mode D'emploi page 10

ENGLISH
The vibration level may increase above
the level stated.
When assessing vibration exposure to
determine safety measures required by
2002/44/EC to protect persons regularly
using power tools in employment, an
estimation of vibration exposure should
consider, the actual conditions of use and
the way the tool is used, including taking
account of all parts of the operating
cycle such as the times when the tool is
switched off and when it is running idle in
addition to the trigger time.
Do not operate the tool if the vibration
registers as abnormal.
Safety of others
This appliance is not intended for use
u
by persons (including children) with
reduced physical, sensory or mental
capabilities, or lack of experience and
knowledge.
Unless they have been given
supervision or instruction concerning
use of the appliance by a person
responsible for their safety.
Children must be supervised to
u
ensure that they do not play with the
appliance.
After striking a foreign object. Inspect
u
the appliance for damage and make
repairs as necessary.
Residual risks
Additional residual risks may arise when
using the tool which may not be included
in the enclosed safety warnings.
10
(Original instructions)
These risks can arise from misuse,
prolonged use etc. Even with the
application of the relevant safety
regulations and the implementation of
safety devices, certain residual risks can
not be avoided. These include:
Injuries caused by touching any
u
moving parts.
Injuries caused by touching any hot
u
parts.
Injuries caused when changing any
u
parts or accessories.
Injuries caused by prolonged use
u
of the appliance. When using any
appliance for prolonged periods
ensure you take regular breaks.
Impairment of hearing.
u
Health hazards caused by breathing
u
dust developed when using your
tool (example:- working with wood,
especially oak, beech and MDF.)
If operating the mower in a damp
u
location is unavoidable, use a residual
current device (RCD) with a tripping
current of not more than 30 mA.
Use of an RCD reduces the risk of
electric shock.
Never pick up or carry an appliance
u
while the motor is running.
Warning symbols
The following warning symbols are found
on the appliance along with the date
code:
Warning! Read the manual prior
to operation.