Accu-Chek Performa Manuel D'utilisation page 25

Setup
Setting the Test Reminders
NOTE
Test reminders:
• beep at the same time each day.
• beep every 2 minutes up to 3 times.
• turn off by inserting a test strip or pressing
any button.
1
Press and release to
turn the meter on.
The flashing test strip
symbol appears on the
display.
Press and hold until
set-up appears on the
display.
Meter Memory, Setup, and Data Transfer
2
Press and release
repeatedly until the bell
symbol, OFF, set-up, and
the flashing A-1 appear
on the display.
• If a test was performed within 15 minutes
of a test reminder, the test reminder does
not beep.
• If the meter is on at the test reminder time,
the test reminder does not beep.
• Exposure to cold conditions may disable test
reminders until the meter is turned on.
• If a test reminder is off in set-up mode, any
subsequent test reminders are also off. For
example, if you set A-1 but turn off A-2, then
A-3 and A-4 will automatically be off.
3
Press and release or
to switch between On
and OFF.
Press and release to
set your choice.
If On is selected, the hour
flashes.
4
Press and release or
to adjust the hour.
Press and release to
set the hour.
The minutes flash.
3
23